Harnessing the power of the internal DSP
The supplied editing software gives a practical overview of all system parameters and DSP features within the DP-N amplifier.
It is simple to monitor and edit the DP-N remotely.
REDUNDANCY
DP series amps get used in ‘mission critical’ environments. Therefore the ‘auto’ mode has been built in to deliver redundancy capability.
Set the input to ‘Auto’ and the input will change, should a problem happen with external connections.
(Use of an internal delay is advised to compensate for any switch timing and latency issues)
FIR FILTERS
Independent control of magnitude and phase.
More detailed equalisation.
Optimization of frequency and power response.
STABLE DOWN TO 2 OHMS
Huge output power and stable down to 2 Ohms
The power output figures of DP-N series are staggering.The rated power outputs are measured at THD = 1%, continuous sinusoidal 1 KHz with each channel working simultaneously.
DP-N amps are also stable down to 2 Ohms. This allows for multiple 8 Ω or 16 Ω speakers to be driven with extreme power.
DANTE ™
Using the Ultimo 4×4 chipset, DP-N amps easily join any Dante ™ ecosystem.
Digital audio connectivity of up to 96 KHz
Remote, network control.
Audinate® is a registered trademark of Audinate Pty Ltd.
Dante® is a registered trademark of Audinate Pty Ltd.
-
2 channels
-
8 Ohm 2 x 2000 W
-
4 Ohm 2 x 3400 W
-
2 Ohm 2 x 4760 W
-
16 Ohm Bridged 1 x 4000 W
-
8 Ohm Bridged 1 x 6800 W
-
4 Ohm Bridged 1 x 9520 W
-
100 V Hi-Z 2 x 3400 W
-
70 V Hi-Z 2 x 2400 W